• Full Vehicle Diagnostic Scan (Pathfinder/SDD)
• ECU Fault Code Read & Reset
• Post-Repair Diagnostic Session
• Fault Isolation / Root Cause Analysis
• Software Version Check & Update Recommendations
• Dashboard Warning Light Diagnosis
• Electrical System Health Report
• Battery Management System Diagnostic
• Suspension Height Calibration
• ABS / TCS Fault Scan & Reset
• TPMS Malfunction Diagnosis

• Engine Control Unit (ECU) Replacement & Flash
• Transmission Control Module Programming
• Body Control Module Reset & VIN Mapping
• Used Module Programming / Reinitialization
• Digital Instrument Cluster Flash (New Unit)
• Immobilizer (KVM) Sync / Key Programming
• Parking Brake Module Coding
• Air Suspension Control Module Reprogram
• Infotainment Head Unit Flash
• Navigation System Activation / License Upload
• Adaptive Cruise Control Firmware Sync

⏱️ Typical Programming Session Duration: 45–90 mins

• CCF File Unlock & Feature Map (via Pathfinder or JET)
• OEM Feature Enable from Factory Spec
• Lost Feature Recovery (Post-Deactivation by Dealer Update)
• Activation of Power Tailgate, Cluster, or Rear Climate Control
• Market-Specific Feature Configuration (e.g. DRLs, TSR)
• Recode After Module Replacement (e.g. cluster, BCM)
• Adaptation of Features for Export/Reimported Vehicles

Note: JLR uses encrypted configuration files stored on the cloud tied to VIN. We access these through licensed TOPIx Cloud Access sessions.

• Airbag Module Reset (post-crash)
• SRS / Restraint Control Unit Programming
• Dynamic Suspension Module Reset
• Lane Assist & Radar Realignment
• Blind Spot Assist System Recovery
• Fuel Cut-off Reset
• Crash Event Clearance (CCM / RCM Memory)
• Electrical Fault Isolation after Accident
• Vision Assist System Reinitialization

• InControl App Activation
• SIM Setup for Telematics / Nav
• Subscription Service Setup (Navigation, Online Features)
• Map License Activation (Navigation Pro)
• Remote App Error Resolution
• Touch Screen Blackout / Unresponsive Fix
• Wi-Fi Hotspot Re-initialization

Supports post-install coding required to finalize new OEM part functions.

• Commission Newly-Fitted Reverse Camera
• Power Tailgate ECU Flash & Travel Limit Set
• Ambient Lighting Color Control Activation
• Heated/Cooled Seat Module Programming
• Surround Camera System Re-flash
• Blind Spot Monitor ECU Sync Post Retrofit
• Audio Amplifier Upgrade (Meridian Enabler)
• Cluster Type Change: Analogue → TFT

ProTip: Many upgrades installed by 3rd parties do not function unless coded. This is where official service tools are crucial.

• Global Window Close/Open Activation
• Windshield Wiper Parking Position Reset
• Enable Auto-Lock (Speed-Based Door Locking)
• Folding Mirror Configuration
• Subwoofer Activation in SVR/Autobiography
• Braking Assist & Emergency Assist Recalibration
• DRL (Daytime Running Light) Behavior Change
• Auto Start/Stop Disable (Market Dependent)