What This Service Delivers

Autonomous Emergency Braking (AEB) is one of the most important active safety systems fitted to modern Jaguar Land Rover vehicles. The system continuously monitors the road ahead using a forward-facing camera and, on many models, a radar sensor mounted behind the front grille. When AEB detects an imminent collision with a vehicle, pedestrian, or cyclist, it provides a visual and audible warning to the driver. If the driver does not respond in time, the system automatically applies the brakes to reduce the severity of the impact or avoid it entirely.

Many JLR models leave the factory without AEB, even though the necessary hardware and software support are already present in the vehicle architecture. Our Autonomous Emergency Braking (AEB) service either activates the dormant feature through direct ECU coding or installs the required genuine JLR camera and radar sensor package and then codes the complete system to factory specification.

We access the vehicle’s driver assistance modules via the JLR diagnostic gateway using SDD or Pathfinder software. We read the existing configuration, identify the AEB control unit, enable the relevant function bits, and verify that the collision warnings, display messages, and braking intervention operate correctly. When hardware is required, we install genuine JLR components in the exact factory positions and perform full calibration.

The activated system integrates fully with the vehicle’s existing safety architecture. AEB operates independently of other driver assistance features, providing continuous monitoring at all speeds. The system respects all factory safety parameters and works in harmony with traction control, stability control, and braking systems.

Technical Scope & Vehicle Coverage

How the Autonomous Emergency Braking Activation Works

1. Vehicle Assessment & Hardware Check: We inspect your vehicle to determine whether the necessary forward camera and radar sensor are already fitted. Many vehicles have the hardware but lack only the software activation.
2. Configuration Backup: We archive the current driver assistance module configuration so the change can be reversed if needed.
3. Hardware Installation (if required): For vehicles missing components, we install genuine JLR forward camera and radar sensor in the exact factory positions and connect them to the relevant modules.
4. Coding & Function Activation: We enable the AEB function bits in the relevant modules and verify communication between all components.
5. System Verification: We perform a full system self-test, calibrate the camera and radar if necessary, and confirm that the collision warnings and braking intervention operate correctly.

Why Choose lr-retrofit.com for Autonomous Emergency Braking

• Factory Specification: The system operates exactly as a factory-installed AEB because it uses the original JLR hardware and software. No aftermarket modules or third-party sensors.
• Visually Invisible: All components fit in the original factory locations. There is no sign of retrofitting either inside or outside the vehicle.
• Preserves All Existing Functions: Your current driver assistance features continue to operate normally. AEB adds collision protection without removing anything.
• Dealer-Diagnostic Safe: The coding uses the same configuration bytes that JLR uses for factory-fitted vehicles. No fault codes, no warning lights, and no trace of non-original software.
• Fully Reversible: Your original configuration is stored. We can restore the vehicle to its previous state at any time without any trace.
• Genuine JLR Parts: When hardware is required, we use only original Jaguar Land Rover components with full manufacturer warranty.

Technical Considerations Before Ordering

For vehicles equipped with the newer Pivi Pro infotainment system (2020+), the AEB coding is fully supported but may require a slightly different diagnostic approach due to updated module security. We confirm compatibility before proceeding.

The activation of AEB integrates with the existing braking system and stability control. The system operates within factory safety parameters and applies braking only when a collision is imminent and the driver has not responded to warnings.

For vehicles still under manufacturer warranty, this coding change is reversible and does not affect engine, transmission, or safety modules in any permanent way. No permanent modification is made, and standard diagnostic scans do not flag the change. We provide complete documentation to support your position.

Frequently Asked Questions

Will the system automatically brake if a collision is imminent?

Yes. If the system detects an imminent collision and the driver does not respond to the visual and audible warnings, it automatically applies the brakes to reduce impact severity or avoid the collision entirely.

Can the Autonomous Emergency Braking be reversed?

Yes. We keep a backup of your original configuration. At any time, we can restore the factory settings and remove the AEB activation completely.

Does this affect my existing driver assistance features?

No. All existing features, including blind spot monitoring, lane departure warning, and parking sensors, continue to operate exactly as before. AEB adds collision protection without removing anything.

Will my dealer notice the modification?

Standard dealer diagnostic equipment reads the configuration bytes but does not flag the change as an error. The modification is invisible during normal servicing.

Do you offer a mobile service?

We offer a fully supported remote coding service for vehicles where the camera and radar sensor are already present. For hardware installation, we operate from our workshop facility and also offer a collection and delivery service within a 50-mile radius.

What if my vehicle does not have the required hardware?

We install genuine JLR forward camera and radar sensor in the exact factory positions. The additional hardware cost depends on your vehicle model and existing equipment. We provide a detailed quote before any work begins.

Add Autonomous Emergency Braking to Your JLR Today

Autonomous Emergency Braking provides a critical safety net that can prevent or reduce the severity of collisions. Whether you want to activate a dormant factory feature or add the complete camera and radar package, our professional service delivers factory-spec results with complete diagnostic safety.

Price: £599.00 (including VAT) for coding activation where camera and radar are already present. Hardware installation quoted separately based on vehicle specification. Remote coding loan interface available with a refundable deposit.

Order Autonomous Emergency Braking

Questions? Contact our JLR technical team at support@lr-retrofit.com or call +44 (0) 20 1234 5678. We respond to all technical enquiries within one working day.