OEM-grade 360 surround camera retrofit for Land Rover and Jaguar. Add full bird’s-eye view, front and side cameras, and dynamic parking guidance with plug-and-play installation.
Product Overview
LR Retrofit supplies a complete 360 surround camera system for Land Rover and Jaguar vehicles. This retrofit adds the factory bird’s-eye view function to your existing touchscreen. You gain four wide-angle cameras that stitch together a real-time aerial view of the vehicle surroundings. The system helps you manoeuvre in tight spaces, avoid kerb damage, and park with confidence.
Each camera uses automotive-grade CMOS sensors with a 190-degree field of view. The control module processes the four video feeds and outputs a seamless top-down image to the original infotainment display. LR Retrofit provides the exact mounting brackets, wiring looms, and calibration targets for a professional installation.
Key Features
- Full 360-degree bird’s-eye view on the factory touchscreen
- Four OEM-grade wide-angle cameras: front, rear, left, right
- Dynamic parking guidelines with steering angle input
- Front cross-traffic view for blind junctions
- Off-road camera mode where supported by the vehicle
- Automatic activation in reverse and low-speed manoeuvring
- Plug-and-play wiring with vehicle-specific connectors
- No permanent modifications to factory harness
The system integrates with the existing parking sensor display. You see the bird’s-eye view alongside the sensor visualisation. The front camera activates automatically below 10 mph when the parking aid engages.
Performance Benefits
The 360 surround camera system eliminates blind spots around the vehicle. You spot low obstacles, curbs, and children or pets that would otherwise remain hidden. The dynamic guidelines move with the steering wheel to show your exact trajectory. This reduces the risk of wheel damage and parking scrapes. The front camera view helps you exit blind alleys and junctions safely.
Technical Specifications
| Camera sensor | 1/3-inch CMOS, 1.3 megapixel |
|---|---|
| Field of view | 190 degrees diagonal (each camera) |
| Video output | LVDS digital, 720p |
| Frame rate | 30 fps per camera |
| Control module | JLR-compatible surround view processor |
| Operating temperature | -30°C to +80°C |
| Ingress protection | IP67 for all cameras |
| Night vision | Built-in low-light enhancement |
| Interface | Factory CAN bus and touchscreen integration |
Compatibility
- Land Rover Range Rover (L405, L460)
- Land Rover Range Rover Sport (L494, L461)
- Land Rover Discovery 4 (L319) and Discovery 5 (L462)
- Land Rover Defender (L663)
- Land Rover Range Rover Evoque (L538, L551)
- Land Rover Discovery Sport (L550)
- Jaguar F-Pace (X761)
- Jaguar E-Pace (X540)
Vehicles must have the factory touchscreen infotainment system with video input capability. LR Retrofit confirms full compatibility from your VIN before dispatch.
Installation and Coding Support
We recommend professional installation. LR Retrofit provides remote coding support through JLR diagnostic tools. The surround view module requires the correct Car Configuration File entry for the vehicle. Our technical team supplies the exact coding parameters for your model and year. The calibration procedure uses a set of floor mats that align the four camera views into one seamless image.
The wiring looms route along the existing factory paths. The front camera mounts behind the grille or in the front bumper. The side cameras integrate into the mirror housings or side repeater positions. The rear camera replaces or supplements the existing reverse camera. All connectors match the factory pin-outs.
Technical Note
The 360 surround camera system uses the vehicle CAN bus to receive steering angle and speed data. This allows the dynamic guidelines to move in real time. The system also reads the reverse gear signal for automatic activation. LR Retrofit supplies the correct CAN interface module for vehicles without the factory surround view wiring.
Package Contents
- Four wide-angle cameras with mounting brackets
- Surround view control module
- Vehicle-specific wiring loom set
- CAN bus interface module
- Calibration mats and alignment guide
- Installation and coding manual
Why Choose LR Retrofit
LR Retrofit focuses exclusively on JLR electrical upgrades. Each camera and module receives a final quality inspection before dispatch. We use automotive-grade components and offer a 24-month warranty. Our support team assists with coding, calibration, and troubleshooting from start to finish.
Order and Delivery
Order the 360 surround camera retrofit kit today. We dispatch from stock within one business day. Worldwide shipping includes full tracking. Contact our team for a VIN-specific compatibility check before purchase.
