Genuine Dash Cam

Product Overview

The Land Rover Genuine Dash Cam gives you a discreet, permanent recording companion that never requires charging, aligning or re‑connecting. Unlike generic dash cams, this system integrates directly into your vehicle’s electrical architecture. The camera starts recording automatically with the ignition and switches seamlessly into parking surveillance mode when you park. Every component we use matches the JLR parts catalogue, and the camera module tucks neatly into the roof console behind the mirror mounting. You access your recordings, adjust settings and download protected files through the dedicated smartphone app via a direct Wi‑Fi connection. The system includes impact‑detection logic, a wide 140‑degree field of view, and Full HD recording. By choosing the genuine system, you also retain the clean, uncluttered cabin design Land Rover intended.

Genuine Dash Cam Technical Specification

Our installation reproduces the factory dash cam architecture, from the power‑on timing to the battery voltage monitoring. The entire solution uses only Land Rover‑approved parts, ensuring full compatibility with your vehicle’s CAN‑bus power management and security systems.

Factory‑Integrated Camera Module

We fit the genuine camera module precisely behind the rear‑view mirror, using the vehicle’s existing trim and mounting points. The compact unit stays completely out of the driver’s line of sight. It captures crisp 1920 × 1080 Full HD video at 30 frames per second, with a wide dynamic range that balances bright skies and shadows. The high‑quality glass lens provides a 140‑degree field of view, recording everything from lane changes to crossing pedestrians without distortion. The camera includes an integrated microphone that records in‑cabin audio, which you can enable or disable in the app.

Intelligent Recording and Incident Detection

The dash cam begins recording the moment the engine starts. It continuously saves video in looping segments onto the included high‑endurance microSD card. When the card fills, the camera automatically overwrites the oldest files with no required action from you. A built‑in G‑sensor continuously monitors the vehicle’s motion. During an abrupt deceleration, a collision or a strong impact while parked, the sensor instantly locks the current recording, protecting it from being overwritten. The camera also supports motion‑triggered parking mode. When you switch the ignition off, the camera enters a low‑power standby state and resumes recording if it detects movement or a physical shock near the vehicle.

Vehicle‑Specific Power and Protection

We connect the dash cam using a genuine Land Rover wiring harness, routing power directly from the vehicle’s passenger compartment fuse panel. The cable runs invisibly through the headlining and A‑pillar, secured with OEM clips and foam wraps. No part of the installation uses a 12 V accessory socket. The system includes a factory‑grade power management module that monitors battery voltage. If the voltage drops near a pre‑set safe level during parking mode, the module disconnects the camera, guaranteeing the battery retains sufficient charge to start the engine. This intelligent power supervision also avoids triggering modern battery management system warnings or Can‑bus errors.

App Connectivity and Data Management

The dash cam creates its own Wi‑Fi network that your smartphone connects to directly. Using the Land Rover Dash Cam app (available for iOS and Android), you view a live feed, adjust recording sensitivity, format the SD card and download both driven and parked recordings. The app displays event clips clearly, and you can save and share footage directly from your phone. Settings such as G‑sensor sensitivity, parking mode duration and audio recording preferences adjust in a few taps. The app also overlays speed and GPS position data when the camera receives location information from your smartphone during setup.

Expert Installation by JLR Specialists

We complete the genuine dash cam retrofit in a single appointment. Every step follows Land Rover’s workshop procedures, ensuring the camera functions from the first ignition cycle and leaves no trace of aftermarket wiring.

1. Pre‑installation Assessment: We verify your vehicle’s VIN against the genuine dash cam application list and carry out a full diagnostic scan to confirm all electrical systems are healthy.
2. Camera Mounting and Wiring: We attach the camera bracket behind the mirror and route the pre‑terminated power harness along the factory wiring path. The cable terminates at the fuse panel with the correct fuse tap and ground point. All trim removal and refitting follows the official trim removal guides.
3. Power Management and SD Card Setup: We install the power management module in a designated pocket and insert the high‑endurance SD card. After initial power‑up, we format the card through the app and set the correct time, date and desired recording sensitivity.
4. Functional Testing and Handover: We test continuous recording, the G‑sensor event lock, parking mode activation and Wi‑Fi connectivity. We then show you how the app works, verify the camera angle and confirm that all vehicle functions, including the auto‑dimming mirror and rain sensor, operate without interference.

Your Complete OEM Dash Cam Solution

A genuine dash cam does more than record video. It provides irrefutable evidence in the event of a collision, protects you from fraudulent claims, and captures scenic journeys without any distraction. Because the Land Rover Genuine Dash Cam draws power intelligently and hides behind the mirror, you never need to think about it until the moment you require the footage. The system operates without adding wires, suction cups or auxiliary displays to your cabin, maintaining the premium feel of your Land Rover or Jaguar. You also benefit from the reassurance that every part carries the JLR warranty and fits your vehicle’s electrical network flawlessly.

By choosing this factory‑specification retrofit, you avoid the common pitfalls of universal dash cams: drained batteries, visible cables, unreliable mounts and incompatible parking modes. Our solution gives you a permanent, set‑and‑forget safety companion that adds real value to your vehicle and offers complete peace of mind every time you start the engine.

Add the Genuine Dash Cam to Your Vehicle

Protect every journey with the official Land Rover Genuine Dash Cam, installed by JLR specialists. Our mobile service covers the entire UK, and we complete the full retrofit in one day at your home or workplace.

Contact us today for a complimentary VIN check and a fixed‑price quotation. Every installation includes a high‑endurance SD card, a power management module and a 12‑month workmanship warranty. Start recording with genuine Land Rover confidence.