360 Parking Aid Plus Park Assist Retrofit for Land Rover & Jaguar
Guide your vehicle into any space with confidence—factory-grade 360 Parking Aid and Park Assist, engineered for JLR vehicles, configured to your VIN, and activated through JLR-approved diagnostic pathways.
Complete Awareness Around Every Corner
This 360 Parking Aid and Park Assist retrofit surrounds your vehicle with ultrasonic coverage. Twelve sensors monitor the front bumper, rear bumper, and both flanks, and the Parking Aid Module calculates the distance to every obstacle within range. Your touchscreen displays a colour-coded graphic of the vehicle with proximity bars on each side, while the audio system emits a variable-rate tone that quickens as you close the gap.
Park Assist takes the system further. You select a detected space on the touchscreen, and the vehicle steers itself into place while you manage the pedals and gear selector. The Electric Power Assisted Steering rack applies the calculated input, and the Parking Aid Module monitors the manoeuvre continuously. Parallel parking in a tight city street becomes a calm, repeatable procedure. Park Exit reverses the process and guides you out of a perpendicular bay when forward visibility stays restricted.
Key Features
- Twelve ultrasonic sensors cover the front, rear, and both sides of the vehicle.
- Touchscreen proximity display shows colour-coded distance bars on a vehicle graphic.
- Variable-rate audio alerts increase in frequency as you approach an obstacle.
- Automated parallel parking steers the vehicle into a detected kerbside space.
- Automated perpendicular parking guides you into and out of bay spaces.
- Park Exit function manoeuvres the vehicle out of a tight perpendicular bay.
- Rear Traffic Monitor detects crossing vehicles behind you and warns the driver.
- Reverse brake intervention applies the brakes when a collision risk develops behind the vehicle.
- Side distance monitoring protects the flanks during low-speed manoeuvres and narrow-lane driving.
- Towing-aware calibration suppresses rear alerts while you reverse with a trailer attached.
- Parking sensor mute switch silences the alerts when you wash the vehicle or sit in traffic.
Technical Specifications
We supply every component to meet JLR factory standards for detection accuracy, durability, and electromagnetic compatibility. Our team configures the Parking Aid Module with your vehicle’s exact build data, so the system behaves exactly like a factory-installed unit.
| Parameter | Specification |
|---|---|
| Sensor Count | Twelve ultrasonic sensors: six front, six rear (four front and four rear on selected variants) |
| Sensor Type | Ultrasonic, 40 kHz nominal, sealed to IP69K |
| Detection Range | Approximately 0.3 m to 2.5 m per sensor |
| Control Module | Parking Aid Module (PAM) with CAN-HS and LIN connectivity |
| Park Assist Functions | Parallel entry, perpendicular entry, perpendicular exit |
| Steering Interface | Electric Power Assisted Steering (EPAS) with automatic input authority |
| Brake Interface | ABS and ESC modules for reverse brake intervention |
| Display | Touch Pro and Touch Pro Duo touchscreen with parking menu integration |
| Operating Speed Range | Active up to 16 km/h for parking aid; Park Assist operates below 5 km/h |
| Operating Temperature | −40 °C to +85 °C |
What the Retrofit Kit Contains
You receive a complete installation package with detailed colour instructions that cover torque values, connector views, and the necessary CCF amendments. Every clip, seal, and fixing arrives in the box.
- Ultrasonic sensor set with vehicle-specific mounting grommets and retainers
- Parking Aid Module with vehicle-specific mounting bracket
- Front and rear bumper wiring harnesses with genuine OEM connectors
- Dashboard mute switch or touchscreen control integration
- Sensor paint-matched covers where required for your exterior colour
- All fixings, anti-corrosion treatments, and loom routing clips
- Remote CCF editing support to enable the parking aid and Park Assist menus
Vehicle Compatibility
This 360 Parking Aid and Park Assist retrofit suits Land Rover and Jaguar models fitted with EPAS and Touch Pro or Touch Pro Duo infotainment. We verify your VIN before dispatch to guarantee exact compatibility and correct harness configuration.
- Range Rover L405 and L460
- Range Rover Sport L494 and L461
- Discovery 5 L462 and Discovery Sport L550
- Range Rover Velar L560 and Evoque L551
- New Defender L663
- Jaguar XE X760, XF X260, F-Pace X761, E-Pace X540, and I-Pace
Contact our technical team for specific model-year confirmation, bumper variant details, and Park Assist availability by market.
Installation & System Integrity
Our authorised installation partners follow a meticulous, vehicle-specific procedure. They remove the bumpers, fit the sensors into the factory-marked positions, route genuine-style harnesses along the existing loom paths, and install the Parking Aid Module. Our technicians then calibrate the sensor geometry and activate the parking menus through proprietary JLR-compatible software. We finish with a full function test against physical obstacles and a Park Assist validation in a marked bay. This approach ensures the system performs with the same reliability and refinement as a factory-fitted option.
Every component meets or exceeds original equipment standards for detection accuracy and long-term durability. The system undergoes rigorous testing for vibration, water ingress, paint adhesion, and thermal cycling, which guarantees consistent performance in all driving conditions.
Transform Every Low-Speed Manoeuvre
Upgrade your vehicle with a retrofit that embodies the technical excellence expected of the Jaguar and Land Rover brands. This 360 Parking Aid and Park Assist system delivers measurable protection and genuine convenience while preserving the integrity and aesthetics of your vehicle.
Contact our retrofit specialists today to confirm compatibility, receive a detailed quote, and schedule your installation.
