Genuine JLR Keyless Entry Retrofit – Passive Entry & Push‑Button Start

Step into true modern convenience without ever touching a key. Our genuine JLR keyless entry retrofit adds the factory Passive Entry Passive Start (PEPS) system to your Land Rover, giving you touch‑to‑unlock door handles and push‑button ignition. The vehicle recognises you as you approach, unlocks the driver’s door the moment you rest your hand on the capacitive sensor, and fires the engine with a simple press of the Start/Stop button. You keep the key fob in your pocket or bag throughout the entire journey. This retrofit uses only genuine Jaguar Land Rover components, a vehicle‑specific wiring harness, and a remote CCF coding session to seamlessly integrate the system into the existing vehicle architecture — exactly as if the option were installed at the factory.

How the Genuine Keyless Entry System Works

When the authorised key fob enters the vehicle’s detection zone (approximately 1.5 m from any exterior handle), the Keyless Vehicle Module (KVM) wakes up and begins transmitting low‑frequency (125 kHz) interrogation signals via strategically placed interior and exterior LF antennas. The fob receives the challenge, encrypts a response, and transmits it back on the ultra‑high‑frequency band (433 MHz or 868 MHz depending on market). The KVM validates the rolling‑code response within milliseconds and, if the sequence passes all security checks, grants entry authorisation.

Touch the inside surface of a door handle capacitive sensor, and the Central Junction Box instantly unlatches the appropriate door; the vehicle also disarms the volumetric security alarm and illuminates the approach lights. To lock the vehicle, press the small indent on the exterior handle and all doors, tailgate and fuel flap secure simultaneously, followed by a confirmation flash of the hazard lights. Inside the cabin, the Start/Stop button replaces the traditional ignition barrel — the KVM confirms the key’s presence and disables the electronic steering column lock before energising the starter circuit. The whole process feels fluid and invisible.

Key Security & Convenience Features

• Encrypted bidirectional challenge‑response – prevents relay attacks by measuring response time and validating a fresh code on every cycle.
• Capacitive door handle sensors – detect human touch, rejecting moisture and accidental contact.
• Dual LF antenna coverage – interior and exterior antennas map the key’s position to avoid lock‑out scenarios.
• Passive locking – walk away and the system automatically locks after a configurable delay (requires CCF option).
• Immobiliser integration – the KVM communicates with the engine control module over CAN‑bus to maintain factory immobiliser function.

Technical Data

Characteristic	Specification
Keyless module	Genuine JLR KVM (Keyless Vehicle Module), latest hardware revision
LF communication frequency	125 kHz, 3‑axis antenna (exterior handles, interior centre console, tailgate)
UHF reception	433 MHz (EU/ROW) or 868 MHz (where market requires)
Detection range	1.5 m from each exterior handle, 0.8 m from tailgate
Response time	< 150 ms from handle touch to door unlock
Network integration	HS‑CAN & LIN‑bus, unit address programmed via CCF
Power supply	12 V permanent live, fused at 10 A for the KVM; 5 A for each handle heater circuit (if equipped)
Operating temperature	-40 °C to +85 °C (module and handles)

Retrofit Kit Contents

We ship a complete, plug‑and‑play package that includes every genuine JLR part, pre‑assembled connectorised harnesses, and the authoring session needed to bring the keyless entry system to life. No cutting of factory wiring is required — the supplementary harness plugs into existing unused connectors at the central junction box and door nodes, leaving the vehicle’s original security layer intact.

• Genuine JLR Keyless Vehicle Module (KVM) with correct firmware for your VIN
• Four exterior door handles with integrated capacitive sensors and touch‑lock indents (body‑coloured, painted to your paint code on request)
• Internal and external LF antennas (centre console, tailgate, rear bumper)
• Two smart key fobs with remote‑key PCB and emergency blade, cut to your existing lock
• Start/Stop button assembly and immobiliser‑interface harness
• Complete vehicle‑specific wiring harness — power, CAN‑bus, LIN‑bus and antenna connections, labelled for each termination point
• All mounting brackets, clips and OEM fasteners
• Full‑colour installation booklet with 50+ step‑by‑step photographs
• Remote CCF coding session — we enable the KVM, configure the passive entry and start functions, calibrate antenna power, and set user preferences (walk‑away locking, chime behaviour) via JLR‑approved diagnostic software

Compatible Vehicles

We personally check your VIN to confirm that the body control module and network architecture support the necessary KVM gateway and that the doors are pre‑wired for capacitive handle sensing. The retrofit typically fits vehicles originally equipped with passive start but lacking passive entry (touch handles), or those with the full PEPS pre‑preparation. If your Land Rover’s central junction box and door nodes have the required hardware variant, the upgrade is straightforward. Common compatible model ranges:

• Range Rover L405 (2013‑2022) — all UK‑spec vehicles with start/stop button
• Range Rover L460 (2022‑ ) — with connectivity package
• Range Rover Sport L494 (2014‑2022) — MY14 onward
• Range Rover Velar L560 (2017‑ ) — all trims except base with manual key
• Discovery 5 L462 (2017‑ ) — HSE and above, or vehicles with advanced key option
• Defender L663 (2020‑ ) — X‑Dynamic and above
• Range Rover Evoque L551 (2019‑ ) — R‑Dynamic and above
• Discovery Sport L550 (2019‑ ) — vehicles fitted with keyless start

The Everyday Freedom of Keyless Entry

You approach the vehicle with an armful of shopping and the driver’s door unlocks the moment your fingers wrap around the handle. You slide behind the wheel, press the start button, and the engine awakens — no keys scratch the dashboard, no fob exhaustion, no frantic pocket rifling. When you arrive, a simple press of the handle locks every opening and arms the security system; you walk away confident the vehicle secured itself. During the school run or on a wet morning, the passive entry transforms the daily routine from fumbling to fluid. The system remembers exactly where the key sits, making it impossible to lock the fob inside the cabin, and the encrypted communication keeps relay‑theft attempts at bay. This retrofit restores the seamless, premium experience Land Rover engineers designed, using the very parts that left the factory only for top‑tier specifications.

Order with confidence. Send your VIN to our team today. We confirm compatibility within one business day, prepare a detailed quote, and arrange delivery or professional installation at your convenience.