Genuine Brembo brake kits supply factory-correct stopping power for Jaguar Land Rover vehicles. Each kit includes OEM calipers, discs, pads, wear sensors and fitting hardware. We match every kit to your VIN.
Product Overview
LR-Retrofit supplies genuine Brembo brake kits for Jaguar Land Rover vehicles. You receive the same brake components that JLR fits on production lines. Brembo manufactures these calipers, discs, pads and sensors to JLR engineering standards. Each kit matches your vehicle identification number, so you gain exact fitment and original braking performance.
What You Receive
Every genuine Brembo brake kit from LR-Retrofit includes front and rear brake discs, Brembo calipers where applicable, OEM brake pads, electronic wear sensors, caliper bolts, pad fitting hardware and brake fluid recommendations. We package each kit in protective materials and label every component with the relevant JLR part number.
Technical Specifications
Brembo engineers design each brake system for JLR’s specific axle weights, brake torque requirements and electronic stability control calibration. Front disc diameters range from 325 mm to 400 mm depending on model. Calipers feature four or six pistons on performance models. Pad compounds meet ECE R90 regulations and JLR’s NVH standards. Brake discs use high-carbon cast iron with pillar venting for rapid heat dissipation. You receive corrosion-protected hubs and balanced discs ready for installation.
| Component | Specification | JLR Application Note |
|---|---|---|
| Front brake disc | High-carbon cast iron, 325–400 mm diameter, pillar vented | Matches original disc offset and thickness |
| Rear brake disc | High-carbon cast iron, 300–365 mm diameter, solid or vented | Includes electronic parking brake drum where JLR specifies |
| Caliper | Aluminium or cast iron, 2/4/6 piston | Brembo logo, JLR part number |
| Brake pads | ECE R90 approved, low-dust ceramic or semi-metallic | Includes anti-rattle clips and shims |
| Wear sensor | Electronic, two-wire or three-wire | VIN-coded connector |
| Fitting hardware | Caliper bolts, pad pins, retaining springs | Torque to JLR workshop values |
Vehicle Compatibility
These genuine Brembo kits cover Land Rover Defender 90/110/130, Discovery, Discovery Sport, Range Rover, Range Rover Sport, Range Rover Velar and Range Rover Evoque. Jaguar compatibility includes F-Pace, XF, XE, XJ and F-Type. Before ordering, send your VIN to our team. We verify the factory brake option codes and confirm the correct Brembo kit for your vehicle. This VIN check prevents incorrect disc offset, caliper carrier mismatch or pad sensor incompatibility.
Why Choose Genuine Brembo
You maintain original braking feel and electronic safety functions when you fit genuine Brembo components. Aftermarket copies often alter pad friction, disc mass or caliper stiffness. These changes affect ABS, emergency brake assist and hill descent control. Genuine Brembo parts preserve JLR’s validation work. You also protect your vehicle warranty and retain service history accuracy. LR-Retrofit sources directly from approved JLR and Brembo supply chains, so you receive factory-fresh parts with full traceability.
Brake Maintenance & Fluid
JLR specifies DOT 4 LV brake fluid for all vehicles with Brembo brakes. Change the fluid every two years or 30,000 miles, whichever comes first. Use only sealed fluid containers. Inspect disc thickness and pad wear at every service interval. LR-Retrofit stocks genuine Brembo wear sensors and fitting kits for complete brake overhauls.
Installation & Fitting Notes
Your qualified technician should follow the JLR workshop manual for brake replacement. Use a diagnostic tool to retract the electronic parking brake before rear pad fitting. Replace all caliper bolts and torque them to JLR specifications. Bleed the brake system with DOT 4 LV fluid using a pressure bleeder. Perform a bedding-in cycle with moderate stops from 80 km/h to 30 km/h. Avoid hard stops during the first 300 km. After installation, reset the brake wear service indicator through the vehicle menu or diagnostic software.
Signs You Need Replacement
Replace your JLR brake components when you notice steering wheel vibration under braking, longer stopping distances, a brake pad warning light or disc scoring. Genuine Brembo discs include minimum thickness specifications. Your technician can measure with a micrometer. We supply replacement discs individually or in full axle sets.
Order & Delivery
LR-Retrofit dispatches genuine Brembo brake kits across the UK and worldwide. We hold stock for common Range Rover and Defender models and order rare Jaguar kits on demand. Contact us with your registration or VIN for a same-day quotation. We provide a secure checkout, tracked delivery and full fitting support.
