Powered Tailgate Retrofit – JLR Electric Liftgate Conversion

Elevate your Land Rover’s everyday practicality with a genuine powered tailgate conversion. This retrofit transforms a manual tailgate into a smooth, electrically operated system that you control from the key fob, the driver’s seat, or an optional gesture sensor. You enjoy effortless loading and unloading without straining to lift or slam a heavy rear door. Every component carries the same engineering standard as the factory‑fitted system, ensuring flawless integration with your vehicle’s CAN‑bus architecture.

Factory‑Level Electric Operation, Added to Your Vehicle

JLR engineers design the powered tailgate to respond intelligently to every command. The system communicates directly with the vehicle’s Body Control Module (BCM) and Keyless Vehicle Module (KVM), so you always retain full safety interlocks, speed‑sensitive locking, and diagnostic visibility. You activate the tailgate only when the smart key remains within the authorised detection zone, preventing unintended opening.

• Electric spindle drives replace the manual gas struts for quiet, controlled motion
• Powered soft‑close latch secures the tailgate without a slam, protecting hinges and seals
• Cinch actuator draws the tailgate tight against the body for a perfect seal every time
• Obstacle detection immediately stops and reverses movement when resistance exceeds a calibrated threshold
• Multiple trigger points – operate via the original key fob button, the interior release switch, or an optional gesture sensor

Technical Specifications

We supply every component to meet JLR factory standards for durability, weather sealing, and electromagnetic compatibility. Our team pre‑programmes the control module with your vehicle’s exact configuration file, so the tailgate behaves exactly like a factory‑installed unit.

Parameter	Specification
Drive Units	12 V DC electric spindles with integrated Hall‑effect position sensors
Latch Assembly	Powered cinch actuator with emergency manual release cable
Control Module	JLR‑compatible PLGM (Powered Liftgate Module), CAN‑HS & MS CAN connectivity
Opening Method	Remote key fob, interior switch, external handle switch (optional gesture sensor add‑on)
Safety Systems	Pinch‑strip detection (if equipped), motor current monitoring, speed‑dependent locking
Vehicle Integration	KVM, BCM, CJB (Central Junction Box), and infotainment display
Tailgate Speed / Force	Programmable via CCF; default 35 mm/s spindle speed, 300 N dynamic force
Environmental Protection	Spindles IP54, latch IP67, control module IP53; tested from −40 °C to +85 °C

What the Retrofit Kit Contains

You receive a complete installation package with detailed colour instructions that cover torque values, connector views, and the necessary CCF (Car Configuration File) amendments. Every nut, bolt, and weather seal arrives in the box.

• Electric tailgate drive units (left and right) with bespoke mounting brackets
• Powered soft‑close latch and striker plate assembly
• Control module (PLGM) with pre‑loaded vehicle‑specific calibration
• Vehicle‑side wiring harness with genuine OEM connectors
• Interior tailgate switch and exterior handle switch (if applicable)
• All fixings, anti‑corrosion treatments, and loom routing clips
• Remote CCF editing support to enable the feature in the infotainment menu

Vehicle Compatibility

This powered tailgate retrofit fits a wide range of Land Rover models built on the D7u and MLA platforms. We verify your VIN before dispatch to guarantee exact compatibility and correct harness configuration.

• Range Rover L405 (2013–2022) – single‑piece upper tailgate or split‑gate lower
• Range Rover Sport L494 (2014–2022)
• Discovery 5 L462 (2017–onwards)
• Range Rover Velar L560 (2017–onwards)
• New Defender L663 (2020–onwards, single‑piece side‑hinged door)
• Range Rover Evoque L551 (2019–onwards)

Vehicles that left the factory with a manual tailgate and no wiring preparation may require an additional loom route; our team guides you through the process step by step. Most installations complete within three to four hours at our workshop.

Why Choose the Genuine JLR Powered Conversion?

You gain more than just an electric opening. You integrate a system that your Land Rover already understands. The PLGM appears in diagnostics exactly like a factory module, so fault‑finding remains straightforward. Your vehicle’s security architecture stays intact – no third‑party wiring that could compromise the immobiliser or CAN‑bus integrity.

Picture yourself arriving at a rainy trailhead. You press the key fob, and the tailgate rises silently while you keep your hands on your rucksack. The soft‑close latch pulls the door shut with a controlled, reassuring action. Across thousands of cycles, the electric spindles maintain consistent speed and force, whether you operate the tailgate in −20 °C or +50 °C heat.

Ready to add effortless convenience to your Land Rover? Submit your enquiry now, and our retrofit specialist will confirm your vehicle’s compatibility, current pricing, and installation options within one working day.