Blind Spot System for Land Rover & Jaguar
This blind spot system adds radar-based monitoring to your JLR vehicle. Direct-fit sensors, OEM-style mirror indicators, and complete wiring for a plug-and-play installation.
Factory-Grade Blind Spot Monitoring
The blind spot system gives you continuous awareness of vehicles in adjacent lanes. Radar sensors monitor the areas behind and beside your vehicle, and the system alerts you with a visual indicator in the corresponding door mirror. You receive a clear warning when a vehicle enters your blind spot, so you change lanes with confidence.
LR-Retrofit configures the radar modules to match original JLR operation. The system activates automatically when you exceed a set speed and remains active during motorway and urban driving. The mirror indicators illuminate briefly when the system detects a vehicle, and they flash if you indicate toward the occupied lane. You benefit from consistent, reliable monitoring without any change to your driving habits.
Technical Specifications
| Sensor type | Radar-based blind spot detection modules |
|---|---|
| Detection range | Approximately 70 metres behind the vehicle |
| Activation speed | Typically above 15 km/h |
| Warning type | Door mirror LED indicators |
| Sensor mounting | Rear bumper corners with OEM-style brackets |
| Control module | CAN bus integrated with OEM-compatible connector |
| Power supply | 12V DC via factory fuse box |
| Ingress protection | IP67 sealed sensor housings |
| Compatibility | JLR models with door mirror preparation or standard mirrors |
Vehicle Compatibility
LR-Retrofit supplies this blind spot system for a wide range of Land Rover and Jaguar models. Supported vehicles include the Range Rover L405, Range Rover Sport L494, Range Rover Velar L560, Land Rover Discovery 5 L462, and selected Jaguar F-Pace, XF, and XJ models. We verify every order against your vehicle identification number, so you receive the correct radar sensors, mirror indicators, and wiring for your vehicle.
Installation and Configuration
You can complete the installation in approximately three hours using standard trim tools. The radar sensors mount to the rear bumper corners, and the wiring harness routes along the factory loom to the control module. LR-Retrofit provides remote configuration support to activate the blind spot monitoring within the vehicle systems. No cutting or permanent modification to the bumper or door structure occurs during the retrofit.
What You Receive
- Radar blind spot sensors with OEM-style mounting brackets
- Door mirror LED indicator assemblies
- CAN bus control module with OEM-compatible connector
- Complete wiring harness with fuse connections
- Printed installation guide
- Remote configuration support for blind spot activation
Frequently Asked Questions
Will the blind spot system work with my existing door mirrors?
Yes. LR-Retrofit supplies the correct indicator assemblies for your mirror housings, or you receive replacement mirror glass with integrated indicators if your vehicle requires them.
Do I need coding after installation?
Most vehicles require configuration to activate the blind spot monitoring. LR-Retrofit provides remote configuration support, or you can arrange a workshop visit if preferred.
Will the system warn me about fast-approaching vehicles?
Yes. The radar sensors detect vehicles approaching from behind and alert you when they enter your blind spot, giving you time to react safely.
Order with Confidence
Add this blind spot system to your basket, and LR-Retrofit dispatches your order from stock within one working day. You receive a 24-month warranty, full technical support, and remote configuration assistance, so your JLR retrofit project stays on schedule.
