OEM-spec genuine Brembo brake upgrade for Land Rover and Jaguar. Larger discs and multi-piston calipers deliver stronger, fade-resistant stopping power.
Product Overview
LR Retrofit supplies a complete genuine Brembo brake upgrade for Land Rover and Jaguar vehicles. This kit replaces the standard front and rear brake components with larger Brembo discs and multi-piston aluminium calipers. You gain stronger stopping power, better heat dissipation, and consistent pedal feel under heavy use. The upgrade matches the exact specification fitted to high-performance JLR models.
We source every component directly from Brembo and JLR genuine parts channels. The calipers carry the correct part numbers for your vehicle. The discs use high-carbon alloy for thermal stability. The pads feature a fast-bedding compound that bites hard from cold. No aftermarket brackets or adaptors appear anywhere in the kit.
Key Features
- Genuine Brembo fixed calipers with four or six pistons
- High-carbon vented discs with directional cooling vanes
- Brembo low-dust ceramic-composite brake pads
- Direct replacement for original JLR calipers and discs
- Braided stainless steel brake hoses included
- Correct piston sizing for factory ABS and stability control
- Full compatibility with electronic parking brake
- No coding or software changes required
You simply remove the original brake components and fit the Brembo parts in their place. The caliper mounting points align perfectly with the factory hubs. The brake hoses connect to the original hard lines. The result is a clean, factory-quality installation with no visible aftermarket hardware.
Performance Benefits
The Brembo upgrade shortens stopping distances and reduces brake fade during repeated hard stops. You feel a firmer pedal with more immediate response. The larger discs absorb and shed heat far better than the standard rotors. The multi-piston calipers distribute pad pressure evenly across the disc face. You enjoy confident braking with a heavy load, on steep descents, and during high-speed motorway driving.
Technical Specifications
| Front caliper | Brembo fixed, 6-piston aluminium monobloc |
|---|---|
| Rear caliper | Brembo fixed, 4-piston aluminium with EPB |
| Front disc diameter | 380 mm to 410 mm (model dependent) |
| Rear disc diameter | 365 mm to 380 mm (model dependent) |
| Disc type | High-carbon vented, cross-drilled or slotted |
| Pad compound | Brembo low-dust ceramic-composite |
| Hoses | Stainless steel braided, OEM length |
| Fluid recommendation | DOT 4 LV or DOT 5.1 |
| Compatibility | Factory ABS, DSC, EPB, hill hold |
Compatibility
- Land Rover Range Rover (L405, L460)
- Land Rover Range Rover Sport (L494, L461)
- Land Rover Discovery 5 (L462)
- Land Rover Defender (L663)
- Land Rover Range Rover Velar (L560)
- Jaguar F-Pace (X761)
- Jaguar XF (X260)
Your vehicle must have the standard single-piston floating calipers or the smaller factory Brembo option. LR Retrofit confirms the exact disc and caliper set from your VIN before dispatch. Models with carbon-ceramic brakes require a different kit.
Installation and Support
We recommend professional installation by a qualified JLR technician. LR Retrofit supplies the complete hardware kit with calipers, discs, pads, hoses, and all mounting hardware. No coding or software changes appear in the installation process. You simply fit the parts and perform a standard brake fluid bleed. The factory ABS and stability systems recognise the original sensor signals and continue to operate normally.
The installation follows the JLR workshop manual procedure. You replace the front and rear assemblies in sequence. The braided hoses connect directly to the original hard lines. The electronic parking brake modules bolt to the new rear calipers. No cutting or welding appears anywhere in the process.
Technical Note
The Brembo calipers use the factory brake pad wear sensor connectors. You plug the original sensors straight into the new pads. The brake fluid level sensor remains unchanged. The system retains the original brake force distribution and emergency brake assist calibration. LR Retrofit supplies the exact torque settings and bedding-in procedure for your specific model.
Package Contents
- Two front Brembo calipers with mounting bolts
- Two rear Brembo calipers with EPB motors
- Four high-carbon vented discs
- Set of Brembo brake pads with wear sensors
- Four braided stainless steel brake hoses
- Installation and bedding-in guide
Why Choose LR Retrofit
LR Retrofit specialises in JLR performance and mechanical upgrades. Each brake kit receives final inspection before dispatch. We use only genuine Brembo and JLR components. A 24-month warranty covers all parts. Our support team assists with installation guidance and technical questions from start to finish.
Order and Delivery
Order the genuine Brembo brake upgrade today. We dispatch from stock within one business day. Worldwide shipping includes full tracking. Contact our team for a VIN-specific compatibility check before purchase.
