Jaguar Land Rover Soft Door Close Retrofit
Transform the way your Jaguar Land Rover doors close with factory-grade soft close technology. This retrofit replaces the standard mechanical latches with genuine power latching assemblies. A gentle push on the door engages the motor, which cinches the door fully shut. No more slamming or partially closed doors. You gain a luxury closing feel that matches modern JLR models.
How the Soft Door Close System Works
Each soft close latch contains a motor and a micro switch. When the door reaches the secondary latch position, the micro switch sends a signal to the door control module. The control module activates the motor. That motor pulls the door from the secondary position to the fully closed primary position. The latch then confirms closure on the CAN bus. All four doors operate independently and seamlessly.
JLR Technical Integration
We use only original JLR soft close latches and wiring. The retrofit integrates with the existing door control modules and Central Junction Box (CJB). You run the additional power and signal wires through the original door looms. Our team codes the Car Configuration File (CCF) to enable the soft close feature. This coding adds the latch motor parameters and closure confirmation signals. No alarm faults or false door-open warnings appear. The system works with the existing central locking and interior lighting.
Retrofit Kit Contents
- Four genuine JLR soft close latch assemblies
- Door wiring harness extensions with OEM connectors
- Mounting bolts and trim clips
- CCF coding and remote programming support
- Printed installation manual
Vehicle Compatibility
The soft close retrofit supports a wide range of Jaguar and Land Rover platforms. Common vehicles include the Jaguar XE, XF, and F-Pace, along with the Land Rover Discovery Sport, Range Rover Evoque, Range Rover Velar, Range Rover Sport, and full-size Range Rover. We confirm exact fitment from your VIN. The kit matches your existing door latch type and trim level. You receive pre-configured modules where applicable.
Installation and Coding
You install the soft close latches in about three to five hours. Basic hand tools and door trim removal skills are enough. Remove each door card and water shield. Unbolt the original latch and fit the soft close latch in its place. Connect the new harness to the door control module. Reassemble the door and repeat for the remaining doors. We then complete the CCF coding remotely using JLR diagnostic equipment. A short test confirms each door cinches shut and the cluster shows closed status.
Order Your Soft Door Close Retrofit
Order the soft door close retrofit today and enjoy a quieter, smoother door closing experience. We dispatch the complete kit with OEM latches, wiring, and coding support. You receive a 12-month warranty and lifetime technical assistance. Send us your VIN for a confirmed compatibility check and delivery time.
