Head‑Up Display Retrofit Kit – OEM Projection System for Land Rover & Range Rover

Bring a true factory‑fitted driving experience to your vehicle with our genuine Head‑Up Display (HUD) retrofit kit. Designed for the latest generation of JLR platforms, this system projects essential vehicle data directly into your line of sight, allowing you to keep your eyes on the road while monitoring speed, navigation prompts, driver‑assist warnings and more. Every component is a direct replacement part, integrating seamlessly with your vehicle’s Infotainment Master Controller (IMC) and Central Gateway Module.

How the JLR Head‑Up Display Works

The system uses a high‑brightness TFT‑LCD projector mounted inside the dashboard top pad. The image is reflected off a series of precision aspheric mirrors and projected onto the windscreen, creating a virtual image floating approximately 2.3 metres ahead of the driver. To prevent double images (ghosting), the windscreen must be the correct optical specification – either factory‑fitted with the combiner wedge film or replaced with a HUD‑compatible windscreen as part of the installation.

The projector module communicates with the vehicle’s CAN‑HS and MOST (Media Oriented Systems Transport) networks, receiving real‑time data from the Engine Control Module (ECM), Transmission Control Module (TCM), Navigation Module, and Advanced Driver Assistance System (ADAS) controllers. Brightness and vertical position of the display can be adjusted through the touchscreen display settings or the steering wheel controls, and the unit automatically adapts to ambient light conditions using a sensor on the dashboard.

Key Technical Benefits

Uninterrupted visibility of critical data – Speed, ADAS alerts, turn‑by‑turn navigation and gear indicator are displayed without requiring the driver to glance away from the road.
OEM integration – Plugs into the vehicle’s CAN bus and power distribution; no third‑party interfaces or piggy‑back wiring.
High contrast & clarity – The projector delivers 12 000 cd/m² brightness with an 800:1 contrast ratio, making it fully legible in direct sunlight and with polarised sunglasses.
Customisable display content – Once coded, you can toggle which elements appear (e.g. speed, navigation, phone, off‑road pitch/roll) via the instrument panel menu.
Retains factory aesthetics – The instrument panel top pad and trim are identical to the original factory HUD option, with no visible aftermarket additions.
Future‑proof architecture – The module supports over‑the‑air software updates and diagnostic routines via the JLR Pathfinder application.

Included Components

The complete retrofit kit contains all genuine Land Rover parts needed for the installation:

HUD projector module with integral LED backlight and thermal management
Instrument panel top pad with HUD aperture and dust seal
Pre‑terminated LVDS and power/CAN wiring harness
Mounting bracket and fasteners
Replacement sunload/ambient light sensor (if required by vehicle spec)
Installation guide and CCF modification template

All components are supplied in sealed Land Rover packaging and are manufactured to the same specifications as the factory‑fitted system. A HUD‑compatible windscreen is available as an optional upgrade; we can arrange professional replacement by a JLR‑approved glass specialist if your current screen lacks the combiner wedge film.

Compatible Vehicles

The HUD retrofit is available for the following JLR platforms that feature the Pivi Pro or InControl Touch Pro infotainment and the correct electrical architecture. All installations require a HUD‑compatible windscreen – we will check your VIN and current screen part number before dispatch.

Model	Platform Code	Model Year from
Range Rover	L460	2022 onward
Range Rover Sport	L461	2022 onward
Range Rover Velar	L560	2021 onward (MY21.5+)
Discovery 5	L462	2021 onward
New Defender	L663	2020 onward (with 10″ Infotainment)

Earlier models (L405, L494, etc.) may be supported through a different HUD projector variant; please enquire with your VIN.

Installation Notes

The retrofit demands a high level of technical competence and familiarity with JLR vehicle electronics. The process encompasses:

Removal of the existing instrument panel top pad and centre speaker grille (if applicable).
Installation of the HUD projector bracket and the projector module, taking care to maintain the precise alignment and tilt angle specified in the workshop manual.
Routing the wiring harness behind the dashboard cross‑car beam and connecting to the IMC, Gateway Module, and body‑related connectors.
Replacing the windscreen with a HUD‑compatible glass if the original part number does not carry the required wedge film (indicated by ‘HUD’ lettering in the lower corner).
Updating the Car Configuration File (CCF) via Pathfinder or SDD to enable the HUD feature and associated menu screens.
Calibration of the projection geometry using the diagnostic tool to ensure the virtual image is correctly positioned for the driver’s eye‑box.

lr‑retrofit.com offers professional installation at our workshop, or we can provide remote coding support if you are undertaking the physical installation yourself. The entire process typically takes one working day.

Why Choose lr‑retrofit.com for Your HUD Upgrade?

We are specialists in genuine Land Rover retrofits, not a generic aftermarket parts retailer. Every HUD kit we supply is sourced directly from JLR’s genuine parts chain and is bench‑tested before shipping. Our engineering team includes former JLR Master Technicians and diagnostic specialists who understand the intricacies of the CAN bus, MOST ring, and CCF encoding. When you buy a Head‑Up Display retrofit from us, you get the same technology that leaves the factory, backed by our personal support and a 2‑year warranty on all components.

Frequently Asked Questions

I’ve heard that an aftermarket HUD can cause a double image. Is that a problem with this kit?

The factory JLR HUD uses a windscreen with an embedded wedge‑shaped PVB interlayer that aligns the reflected images from the inner and outer glass surfaces. Without this special windscreen, a faint ghost image will be visible. Our kit is designed to be used exclusively with a HUD‑compatible screen. We can verify your current windscreen’s part number and, if necessary, supply and fit the correct glass as part of the installation.

Will the Head‑Up Display work with Apple CarPlay or Android Auto navigation?

Yes. If your vehicle’s infotainment system supports turn‑by‑turn navigation through CarPlay or Android Auto (requires recent software versions), those directional prompts will be displayed in the HUD alongside the native system’s navigation. The same applies to incoming call alerts and selected media information.

Can I fit the projector without replacing the dashboard top pad?

No. The factory HUD projector requires a specific top pad with a calibrated exit window and anti‑reflection coating to achieve the correct optical path. Cutting the existing pad is not recommended and will result in dust ingress and image degradation. Our kit includes the correct replacement trim.

What data is displayed on the Head‑Up Display?

The projected image can show current speed, cruise‑control set speed, live navigation instructions (turn‑by‑turn arrows, distance‑to‑turn, street name), gear position and selected drive mode, ADAS alerts (e.g., Lane Keep Assist, Forward Collision Warning), and telephone call information. The displayed items are configurable once the CCF is updated.