From Monochrome to a Pallete of OEM Colour

LR‑Retrofit gives you the exact same configurable ambient lighting system that defines the high‑line cabin atmosphere of the latest Land Rover and Range Rover vehicles. You move beyond a single white or amber glow—you command a full spectrum of factory‑designed hues. Our retrofit integrates genuine JLR LED modules in the footwells, door handles, door pockets, door trim contours, and centre console. Once we complete the installation, you open the Ambient Lighting menu on your InControl Touch Pro or Touch Plus display. From there, you select your preferred colour from the palette, adjust the intensity of each zone, and watch the interior transform in real time.

You do not receive an aftermarket LED strip kit. You receive a permanent, integrated upgrade that shares the exact same hardware, wiring topology, and software logic as a factory‑ordered configurable option. Every LED module mounts into existing location points; every connector plugs into the original vehicle harness. The system responds seamlessly to the auto‑dimming signal, to the vehicle’s ignition state, and to the door‑open wake‑up script—all thanks to the native Body Control Module logic we programme during the retrofit.

Genuine Hardware, Zero Compromise

We build your ambient lighting system exclusively with JLR‑branded components sourced to your vehicle’s VIN. This precision engineering guarantees perfect colour matching, consistent LED lifespan, and full compatibility with future software updates.

What We Install

• Footwell LED Modules: Genuine lamp units for driver and passenger footwells, delivering a wash of soft, indirect colour across the carpetline. The modules clip into dedicated mounting slots behind the lower trim panels.
• Door Handle Recess Illumination: Two dedicated LEDs per front door that highlight the inner door pull. The glow appears as a subtle halo around your fingertips, never a distracting point source.
• Door Pocket and Contour Lighting: Where your vehicle’s trim allows, we fit slim linear LED emitters that trace the door pocket opening or the decorative door card contour, creating a floating‑light effect that mirrors the flagship cabin design.
• Centre Console Ambient Strips: A precisely shaped LED strip that wraps the transmission tunnel or the waterfall console, bridging the illumination between the front footwells and the rear seating area.
• Vehicle‑Specific Wiring Overlay: A pre‑terminated harness fabricated with JLR‑issue connectors, twisted‑pair LIN and CAN circuits, and factory‑routed fuse positions. Every connection follows the same pathway as a factory‑built option.

Software Activation & CCF Editing

Our diagnostic platform writes the correct Central Car Configuration data to your vehicle’s Gateway Module, Body Control Module, and Door Modules. This single step awakens the Ambient Lighting menu on your touchscreen, assigns the correct LIN addresses to each new LED module, and synchronises the colour command messages across the network. You gain independent brightness sliders for front, rear, and console zones, plus the colour wheel that shifts all lamps through the exact hex values defined in the JLR colour map. The system passes full end‑of‑line diagnostics with no body controller fault codes, guaranteeing a service‑book‑clean installation.

Why You Deserve Configurable Ambient Lighting

The cabin environment defines your emotional connection to your vehicle. With configurable ambient lighting, you craft that environment daily. Select a cool cyan for spirited motorway journeys, a deep amber for relaxing country lane drives, or a warm purple that complements your leather interior. The indirect illumination reduces eye strain during night driving by gently lifting the cabin’s contrast level without creating reflections in the glass. You also benefit from the convenience lights that activate when you open a door, casting a welcoming glow into the footwell and door aperture before you even sit down.

This upgrade carries genuine residual value. Unlike stick‑on kits, our OEM integration appears on the vehicle’s build data, aligning perfectly with the options list that dealers recognise. Your configurable ambient lighting becomes a documented factory‑grade enhancement, not a reversible afterthought.

Our Precision Workshop Approach

We treat every door card, B‑pillar trim, and centre console fascia with the same care that the production line demands. Our technicians release the trim clips using JLR‑specified tools, preventing any marring. After mounting each LED in its validated location, we route the overlay harness through the existing rubber bellows and cable channels, replicating the factory routing exactly. We test every lamp with a diagnostic actuation command before reinstalling any trim, confirming colour accuracy and uniform brightness. The final step activates the ambient lighting menu, and we invite you to run through every colour and zone slider so you leave with complete confidence in the system.

Booking Your Upgrade

Secure your installation date with a 50% deposit. We then order your VIN‑matched LED kit directly from JLR’s genuine parts supply chain. Workshop time for a full configurable ambient lighting retrofit typically ranges from six to eight hours, depending on the trim and door configurations. You receive a full post‑installation diagnostic report, and we back the entire job with a 12‑month comprehensive warranty on parts and labour. Contact our technical team now to confirm compatibility on your Discovery, Range Rover Sport, Velar, Evoque, or full‑size Range Rover.