OEM-grade configurable ambient interior lighting for Discovery 5. Add multi-zone LED modules with touchscreen colour and brightness control.
Product Overview
LR Retrofit supplies a complete configurable ambient interior lighting retrofit for the Land Rover Discovery 5. This upgrade adds multi-zone LED modules to the door panels, footwells, centre console, and dashboard. You control the colour, brightness, and zone activation directly from the factory touchscreen. The system transforms the cabin atmosphere with a smooth, even light distribution.
We use OEM-grade LED modules and fibre optic light guides that match the latest JLR design language. The components fit invisibly behind the original trim panels. The wiring connects to the vehicle’s existing body control module. No aftermarket control panels remain visible. The result is a factory-fitted appearance with full personalisation.
Key Features
- Multi-zone ambient LED lighting for front and rear cabin
- Touchscreen colour selection with up to 10 presets
- Independent brightness control for each zone
- Door panel, footwell, centre console, and dashboard zones
- Soft start and fade-out lighting transitions
- Automatic activation with vehicle unlock and entry
- Plug-and-play wiring with vehicle-specific connectors
- No permanent modification to trim panels or harness
You select a colour from the factory ambient lighting menu. The system applies the choice instantly to all active zones. You can set different brightness levels for the front and rear areas. The lighting dims automatically when you place the vehicle in drive, reducing distraction.
Performance Benefits
The configurable ambient lighting enhances the Discovery 5 cabin with a premium feel. You notice the subtle glow across the door armrests and lower dashboard. The soft fade transitions create a welcoming atmosphere at night. You reduce eye strain with low-level ambient light that does not distract from driving. The system also helps passengers locate switches and door handles in darkness.
Technical Specifications
| LED module type | OEM-grade RGBW SMD LED, 5050 series |
|---|---|
| Zones | 4 configurable zones (doors, footwells, console, dashboard) |
| Colour range | 16 million colours via RGBW mixing |
| Brightness levels | 256 steps per zone |
| Control interface | JLR touchscreen, body control module CAN bus |
| Operating voltage | 12V DC |
| Power consumption | Less than 15W total at full brightness |
| Ingress protection | IP20 for interior modules |
| Connector type | OEM-compatible 4-pin |
Compatibility
- Land Rover Discovery 5 (L462) 2017–2024
- Vehicles with or without factory ambient lighting
- Right-hand drive and left-hand drive configurations
Discovery 5 vehicles with factory ambient lighting may require a software update to unlock full colour control. LR Retrofit confirms exact compatibility from your VIN before dispatch.
Installation and Coding Support
We recommend professional installation. LR Retrofit supplies the complete hardware kit with LED modules, fibre optic light guides, wiring looms, and mounting clips. Our technical team provides remote coding support through JLR diagnostic tools. You update the Car Configuration File to activate the ambient lighting menu. This enables touchscreen colour and brightness control.
The installation follows the factory method. You mount the LED modules behind the door trim and dashboard panels. The fibre optic guides route along the original trim channels. The wiring harness connects to the body control module using factory pin-outs. No cutting or splicing of the vehicle harness is necessary.
Technical Note
The ambient lighting system communicates over the JLR CAN bus. The body control module sends PWM signals to the LED drivers. You control the colour and brightness through the factory touchscreen. The system stores your preferred settings in the vehicle memory. LR Retrofit supplies the correct coding parameters for your Discovery 5. The lighting system operates independently of the main cabin illumination.
Package Contents
- LED modules for four zones
- Fibre optic light guides and mounting clips
- Vehicle-specific wiring loom set
- Control module with pre-loaded firmware
- Installation and coding manual
Why Choose LR Retrofit
LR Retrofit focuses exclusively on JLR electrical and interior upgrades. Each kit receives final inspection before dispatch. We use only OEM-grade LED modules. A 24-month warranty covers all components. Our support team assists with coding, installation, and troubleshooting from start to finish.
Order and Delivery
Order the configurable ambient interior lighting for Discovery 5 today. We dispatch from stock within one business day. Worldwide shipping includes full tracking. Contact our team for a VIN-specific compatibility check before purchase.
